Tiny extrusions in 2.4.0 · Issue #7976 · prusa3d/PrusaSlicer · GitHub

3dBenchy, the text at the back, 2.4.0 Tiny, extrusion in the gcode that won't physically do anything ;WIPE_START G1 F4320 G1 X96.084 Y101.224 E-.0525 G1 X96.084 Y100.926 E-.1375 ;WIPE_END G1 E-.01 F2100 G1 Z8.2 F720 G1 X95.979 Y106.517 F

Releases · prusa3d/PrusaSlicer

Tiny extrusions in 2.4.0 · Issue #7976 · prusa3d/PrusaSlicer · GitHub

Find a way to define extrusion width based on thin wall thickness · Issue #2163 · prusa3d/PrusaSlicer · GitHub

PrusaSlicer 2.4.0 alpha1 full change log · prusa3d/PrusaSlicer Wiki · GitHub

séquences d'extrusion · Issue #10460 · prusa3d/PrusaSlicer · GitHub

Print Host Upload - Unhandled Exception · Issue #4726 · prusa3d/PrusaSlicer · GitHub

Tiny extrusions in 2.4.0 · Issue #7976 · prusa3d/PrusaSlicer · GitHub

Inconsistent Extrusion · Issue #602 · prusa3d/Prusa-Firmware · GitHub

BUG] Delayed extrusion after travel when using 0.6 mm nozzle (and 0.4 mm as well) · Issue #2997 · prusa3d/Prusa-Firmware-Buddy · GitHub

Inconsistent Extrusion · Issue #602 · prusa3d/Prusa-Firmware · GitHub

PRUSA Slicer 2.0.0 problem · Issue #2559 · prusa3d/PrusaSlicer · GitHub

BUG] Delayed extrusion after travel when using 0.6 mm nozzle (and 0.4 mm as well) · Issue #2997 · prusa3d/Prusa-Firmware-Buddy · GitHub